1 |
解江, 蔡忠义, 王泽洲, 等. 加速应力下随机退化设备剩余寿命预测方法[J]. 电光与控制, 2019, 26 (7): 75- 79.
doi: 10.3969/j.issn.1671-637X.2019.07.015
|
|
XIE J , CAI Z Y , WANG Z Z , et al. A remaining useful lifetime prediction method for stochastic degradation device under accelerated stress[J]. Electronics Optics & Control, 2019, 26 (7): 75- 79.
doi: 10.3969/j.issn.1671-637X.2019.07.015
|
2 |
蔡忠义, 陈云翔, 郭建胜, 等. 考虑测量误差和随机效应的设备剩余寿命预测[J]. 系统工程与电子技术, 2019, 41 (7): 1658- 1664.
|
|
CAI Z Y , CHEN Y X , GUO J S , et al. Remaining lifetime prediction for device with measurement error and random effect[J]. Systems Engineering and electronics, 2019, 41 (7): 1658- 1664.
|
3 |
PECHT M . Prognostics and health management of electronics[M]. New Jersey: Wiley Online Library, 2008.
|
4 |
SI X S , WANG W B , HU C H , et al. Remaining useful life estimation-a review on the statistical data driven approaches[J]. European Journal of Operational Research, 2011, 213 (1): 1- 14.
|
5 |
LU C , MEEKER W . Using degradation measures to estimate a time-to-failure distribution[J]. Technometrics, 1993, 35 (2): 161- 174.
doi: 10.1080/00401706.1993.10485038
|
6 |
PANDEY M , YUAN X , VAN NOORTWIJK J . The influence of temporal uncertainty of deterioration on life-cycle management of structures[J]. Structure and Infrastructure Engineering, 2009, 5 (2): 145- 156.
doi: 10.1080/15732470601012154
|
7 |
TANG S J , YU C Q , WANG X , et al. Remaining useful life prediction of Lithium-ion batteries based on the Wiener process with measurement error[J]. Energies, 2014, 7 (2): 520- 547.
doi: 10.3390/en7020520
|
8 |
LE S K , FOULADIRAD M , BARROS A . Remaining useful lifetime estimation and noisy Gamma deterioration process[J]. Reliability Engineering and System Safety, 2016, 149, 76- 87.
doi: 10.1016/j.ress.2015.12.016
|
9 |
WANG X J , LIN S R , WANG S P , et al. Remaining useful life prediction based on the Wiener process for an aviation axial piston pump[J]. Chinese Journal of Aeronautics, 2016, 29 (3): 779- 788.
doi: 10.1016/j.cja.2015.12.020
|
10 |
HUANG J , GOLUBOVIC D , KOH S , et al. Lumen degradation modeling of white-light LEDs in step stress accelerated degradation test[J]. Reliability Engineering and System Safety, 2016, 154 (10): 152- 159.
|
11 |
SI X S , ZHOU D . A generalized result for degradation model-based reliability estimation[J]. IEEE Trans.on Automation Science and Engineering, 2014, 11 (2): 632- 637.
doi: 10.1109/TASE.2013.2260740
|
12 |
PENG C , TSENG S . Mis-specification analysis of linear degradation models[J]. IEEE Trans.on Reliability, 2009, 58 (3): 444- 455.
doi: 10.1109/TR.2009.2026784
|
13 |
WHITMORE G , SCHENKELBERG F . Modeling accelerated degradation data using Wiener diffusion with a time scale transformation[J]. Lifetime Data Analysis, 1997, 3 (1): 27- 45.
doi: 10.1023/A:1009664101413
|
14 |
SI X S , WANG W B , HU C H , et al. Remaining useful life estimation based on a nonlinear diffusion degradation process[J]. IEEE Trans.on Reliability, 2012, 61 (1): 50- 67.
doi: 10.1109/TR.2011.2182221
|
15 |
YE Z S , XIE M . Stochastic modeling and analysis of degradation for highly reliable products[J]. Applied Stochastic Models in Business and Industry, 2014, 31 (1): 16- 32.
doi: 10.1002/asmb.2063
|
16 |
ZHAI Q Q , YE Z S . Robust degradation analysis with non-Gaussian measurement errors[J]. IEEE Trans.on Instrumentation and Measurement, 2017, 66 (11): 2803- 2812.
doi: 10.1109/TIM.2017.2717278
|
17 |
WHITMORE G . Estimating degradation by a Wiener diffusion process subject to measurement error[J]. Lifetime Data Analysis, 1995, 1 (3): 307- 319.
doi: 10.1007/BF00985762
|
18 |
TANG S , GUO X , YU C , et al. Real time remaining useful life prediction based on nonlinear Wiener based degradation processes with measurement error[J]. Journal of Central South University, 2014, 21 (12): 4590- 4517.
|
19 |
郑建飞, 胡昌华, 司小胜, 等. 考虑不确定测量和个体差异的非线性随机退化系统剩余寿命估计[J]. 自动化学报, 2017, 43 (2): 259- 270.
|
|
ZHENG J F , HU C H , SI X S , et al. Remaining useful life estimation for nonlinear stochastic degrading systems with uncertain measurement and unit-to-unit variability[J]. Acta Automatica Sinica, 2017, 43 (2): 259- 270.
|
20 |
SI X S , WANG W B , HU C H , et al. Estimating remaining useful life with three-source variability in degradation modeling[J]. IEEE Trans.on Reliability, 2014, 63 (1): 167- 190.
doi: 10.1109/TR.2014.2299151
|
21 |
ZHENG J F , SI X S , HU C H , et al. A nonlinear prognostic model for degrading systems with three-source variability[J]. IEEE Trans.on Reliability, 2016, 65 (2): 736- 750.
doi: 10.1109/TR.2015.2513044
|
22 |
FENG L , WANG H L , SI X S , et al. A state-space-based prognostic model for hidden and age-dependent nonlinear degradation process[J]. IEEE Trans.on Automation Science and Engineering, 2013, 10 (4): 1072- 1086.
doi: 10.1109/TASE.2012.2227960
|
23 |
司小胜, 胡昌华, 张琪, 等. 不确定退化测量数据下的剩余寿命估计[J]. 电子学报, 2015, 43 (1): 30- 35.
doi: 10.3969/j.issn.0372-2112.2015.01.006
|
|
SI X S , HU C H , ZHANG Q , et al. Estimating remaining useful life under uncertain degradation measurements[J]. Acta Electronica Sinica, 2015, 43 (1): 30- 35.
doi: 10.3969/j.issn.0372-2112.2015.01.006
|
24 |
CAI Z Y , CHEN Y X , ZHANG Q , et al. Residual lifetime prediction model of nonlinear accelerated degradation data with measurement error[J]. Journal of Systems Engineering and Electronics, 2017, 28 (5): 1028- 1038.
doi: 10.21629/JSEE.2017.05.21
|
25 |
MEEKER W Q , ESCOBAR L A . Statistical methods for reliability data[M]. Hoboken: John Wiley & Sons, 1998: 110- 132.
|