系统工程与电子技术 ›› 2026, Vol. 48 ›› Issue (9): 2931-2938.doi: 10.12305/j.issn.1001-506X.2026.09.06

• 电子技术 • 上一篇    

基于扩散超分重建的小目标检测方法

宋润泽1, 崔洪博2, 赵子龙3, 刘建飞2   

  1. 1. 湖南农业大学资源学院,湖南 长沙 410128
    2. 哈尔滨工程大学信息与通信工程学院,黑龙江 哈尔滨 150006
    3. 西南电子技术研究所,四川 成都 610036
  • 收稿日期:2025-05-28 修回日期:2025-08-14 出版日期:2025-11-10 发布日期:2025-11-10
  • 通讯作者: 崔洪博
  • 作者简介:宋润泽(2005—),男,主要研究方向为多光谱、高分辨率遥感影像
    赵子龙(2000—),男,助理工程师,硕士,主要研究方向为智能联合情报分析处理
    刘建飞(1999—),男,助理工程师,硕士,主要研究方向为航迹关联与识别

Small target detection method based on diffusion super-resolution reconstruction

Runze Song1, Hongbo Cui2, Zilong Zhao3, Jianfei Liu2   

  1. 1. College of Resources,Hunan Agricultural University,Changsha 410128,China
    2. College of Information and Communication Engineering,Harbin Engineering University,Harbin 150006,China
    3. Southwest Research Institute of Electronic Technology,Chengdu 610036,China
  • Received:2025-05-28 Revised:2025-08-14 Online:2025-11-10 Published:2025-11-10
  • Contact: Hongbo Cui

摘要:

随着无人机遥感技术的广泛应用,小目标检测技术受到越来越多的关注。然而,由于图像分辨率受限、噪声干扰以及复杂背景等问题,现有检测方法的精度和鲁棒性依然面临挑战。针对以上问题,提出基于扩散结构的超分重建(super-resolution reconstruction with diffusion structure,SRRDS)的小目标检测方法。首先,针对图像中常见的噪声干扰等问题,提出一种扩散模型驱动退化数据生成模块,通过模拟实际成像系统的物理退化过程,结合双阶段物理约束退化引擎与可控噪声增强模块,生成真实物理退化特征的低质图像,提升训练数据与实际场景的匹配性。其次,针对低分辨率图像纹理细节缺失和边缘信息退化问题,提出多尺度残差生成器模块。通过引入多尺度分支结构、像素重组操作和残差生成块,有效增强输入图像的层次信息表征能力。同时,利用生成对抗网络优化图像质量,实现高精度的超分辨率重建。在AI-TOD数据集和VisDrone-2019数据集中平均精度(average precision,AP)达到了14.1%和25.7%,AP50分别达到了32.9%和41.4%。实验结果表明,与常规检测模型及数据增强方法对比,扩散噪声的引入能够模拟真实场景退化现象,且提高图像分辨率,减少小尺度目标的漏检和虚警现象。

关键词: 扩散结构, 数据增强, 超分辨率重建, 目标检测

Abstract:

As unmanned aerial remote sensing technology becomes increasingly widespread, small target detection technology is receiving growing attention. However, due to limitations in image resolution, noise interference, and complex backgrounds, the accuracy and robustness of existing detection methods still face significant challenges. Therefore, a small target detection method is proposed based on super-resolution reconstruction with diffusion structure (SRRDS). Firstly, to address common issues such as noise interference in images, a diffusion-model-driven degraded data generation module is proposed. By simulating the physical degradation process of actual imaging systems and integrating a dual-stage physically constrained degradation engine with a controllable noise enhancement module, this module generates low-quality images with realistic physical degradation characteristics, improving the alignment between training data and real-world scenarios. Secondly, for issues such as the loss of texture details and edge information in low-resolution images, a multi-scale residual generator module is proposed. By incorporating a multi-scale branch structure, pixel rearrangement operations, and residual generation blocks, this module effectively enhances input image hierarchical information representation. Additionally, it utilizes generative adversarial network to optimize image quality, achieving high-precision super-resolution reconstruction. On the AI-TOD dataset and the VisDrone-2019 dataset, average precision (AP) achieved 14.1% and 25.7%, while AP50 reached 32.9% and 41.4%, respectively. Experimental results demonstrate that compared to conventional detection models and data enhancement methods, the introduction of diffusion noise can simulate real-world scenarios degradation phenomena, improve image resolution, and reduce missed detections and false alarms for small-scale targets.

Key words: diffusion structure, data augmentation, super-resolution reconstruction, target detection

中图分类号: