基于改进Smith预估补偿的网络控制系统研究

Journal of Systems Engineering and Electronics ›› 2009, Vol. 31 ›› Issue (3): 661-665.

基于改进Smith预估补偿的网络控制系统研究

杜锋^1,2, 钱清泉¹

1. 西南交通大学电气工程学院, 四川, 成都, 610031;
2. 海南大学信息科学技术学院, 海南, 海口, 570228

收稿日期:2007-10-09 修回日期:2007-12-29 出版日期:2009-03-20 发布日期:2010-01-03
作者简介:杜锋(1962- ),男,教授,博士,主要研究方向为网络控制系统理论及其应用.E-mail:dufeng488@sina.com

Study of networked control systems based on modified Smith prediction compensation

DU Feng^1,2, QIAN Qing-quan¹

1. Coll. of Electrical Engineering, Southwest Jiaotong Univ., Chengdu 610031, China;
2. Coll. of Information Science & Technology, Hainan Univ., Haikou 570228, China

Received:2007-10-09 Revised:2007-12-29 Online:2009-03-20 Published:2010-01-03

摘要/Abstract

摘要： 为了有效减少网络时延对网络控制系统的影响,提出了一种新的改进Smith动态预估补偿方法,实现了将前向通路的时延从闭环回路中移到闭环回路外,将反馈通路(传感器到控制器)的时延从系统中彻底消除,无需对反馈通路实施网络调度。由于补偿模型不包含网络时延,因此无需在线测量、辨识或估计网络时延的大小,适用于网络时延是随机、时变和不确定,大于一个、甚至数十个采样周期的应用场合。基于CSMA/CD(Ethernet)和CSMA/AMP(CAN bus)网络协议,仿真研究验证了该方法的有效性。

Abstract: In order to effectively restrain the impact of network delay on the NCS,a new approach is proposed that modifies Smith dynamic prediction compensation.The delays of forward path are removed from the closed loop,and time-variant uncertain return path(sensor to controller) delay is totally eliminated from the system.Therefore,the traffic on the return path does not need to be scheduled.Because this compensation model does not include network delays,thus network delays do not need to be measured,identified or estimated on-line,and it is applicable to some occasions that network delays are random,time-variant and uncertain,possibly large compared to one,even tens sampling periods.Based on network protocols of CSMA/CD(Ethernet) and CSMA/AMP(CAN bus),the simulation results show that approach is effective.

中图分类号:

TP273

杜锋, 钱清泉. 基于改进Smith预估补偿的网络控制系统研究[J]. Journal of Systems Engineering and Electronics, 2009, 31(3): 661-665.

DU Feng, QIAN Qing-quan. Study of networked control systems based on modified Smith prediction compensation[J]. Journal of Systems Engineering and Electronics, 2009, 31(3): 661-665.

参考文献

[1] Zhang W,Branicky M S,Phillips.Stability of networked control systems[J].IEEE Control Syst.Mag.,2001(21):84-99.
[2] Yang T C.Networked control system:a brief survey[J].IEE Proc.Control Theory Appl.,2006,153(4):403-412.
[3] Baillieul J,Antsaklis P J.Control and communication challenges in networked real-time systems[C].Proceedings of the IEEE,2007,95(1):9-28.
[4] Ray A,Halevi Y.Integrated communication and control systems:part Ⅰ-analysis[J].JASME Jonrnal of Dynamic Systerm,Measurement and Control,1988,110(4):367-373.
[5] Ray A.Haled Y.Integrated communication and control systems:part Ⅱ-analysis[J].JASME Journal of Dynamic Systems,Measurement and Control,1988,110(4):374-381.
[6] Liou L W,Ray A.A stochastic regulator for integrated communication and control systems:Ⅱ-formulation of control law[J].Journal of the ASME,1991,113(12):604-611.
[7] Liou L W,Ray A.A stochastic regulator for integrated communication and control systems:Ⅱ-formulation of control law[J].Journal of the ASME,1991,113(12):612-619.
[8] Xiong Y S,Yu L,Xu J M.Design of sliding mode predicting controller for network control system[J].Electric Drive Automation,2003,25(4):39-40.
[9] Kim D S,Lee Y S,Kwon W H,et al.Maximum allowable delay bounds of networked control systems[J].Control Eng.Pract.,2003(11):1301-1313.
[10] Liu G P,Rees D,Chai S C,et al.Design,simulation and implementation of the networked predictive control systems[J].Meas.Control,2005(38):17-21.
[11] Liu G P,Rees D,Chai S C.Networked predictive control of internet/intranet based systems[C].Proc.of the 25th Chinese Control Coference 7-11 August,Harbin,HeilongJiang,2006:2024-2029.
[12] Chen P,Dong Y,Ji S.The study of smith prediction controller in NCS based on time-delay identification[C].8th International Conference on Control,Automation,Robotics and Vision Kunruing,China,2004.
[13] Fire K B,Speich J E,Goldfarb M.Transparency and stability robustness in two-channel bilateral telemanipulation[J].ASME Jonrnal of Dynamic Systems,Measurement,and Control,2001:2891-2897.
[14] Bauer P H,Sichitiu M,Lorand C,et al.Total delay compensation in LAN control systems and implications for scheduling[C].Proc.of the American Control Conyerence Arlington,VA,2001:4300-4305.
[15] Chow M Y,Tipsuwan Y.Network-based control systems:a tutorial[C].Proc.of IECON'OI:The 27th Annual Conference of the IEEE Industrial Electronics Society,2001:1593-1602.
[16] Johannessen s.Time synchronization in a local area network[J].IEEE Control Syst.Mag.,2004(24):61-69.
[17] Smith O J M.Closed control of loops with dead time[J].Chemical Engineering Progress,1957,53(5):217-219.
[18] Lian F L,Moyne J R,Tilbury D M.Performance evaluation of control networks:Ethernet,Control Net,and Device Net[J].IEEE Control Syst.Mag.,2001(21):66-83.
[19] Cakmakci M,Ulsoy A G.Bi-directional communication among "smart"components in a networked control system[C].American Control Conference Portland,OR,USA,2005:627-632.
[20] 俞金寿.工业过程先进控制[M].北京:中国石化出版社,2002.
[21] 薛定宇.控制系统计算机辅助设计--MATLAB语言与应用[M].第2版.北京:清华大学出版社,2006.
[22] Martin O,Dan H K,Anton C,et al.TrueTime 1.5-reference manual[M].Department of Automatic Control,Lund University,Sweden,2007.