多种退化机理作用下的产品可靠性建模

doi:10.12305/j.issn.1001-506X.2021.06.32

摘要/Abstract

摘要：

针对受不同因素影响导致性能逐步退化的产品, 首先对造成性能退化产品失效的退化机理进行分析, 将产品性能指标退化看成是由连续性影响因素和离散性影响因素共同作用的结果。其次, 基于扩散过程和累积失效理论, 建立多种退化机理作用下产品性能指标退化模型, 给出模型中参数的估计方法和性能退化产品可靠度估计方法。最后, 通过对某测深设备零位电压数据和液力耦合器振动幅值测量数据进行分析, 说明所提方法是可行的和有效的。

关键词: 性能退化, 可靠性评估, 扩散过程, 非齐次Poisson过程

Abstract:

For the problem that the products performance is gradually degraded due to different factors, firstly, the degradation mechanism of product failure caused by the performance degradation is analyzed. The products performance indicator are degenerated by both the digression factors that are continuance influencing factors and discreteness influencing factors. Secondly, the degradation model of products performance indicator under the action of multiple degradation mechanism is set up based on the diffusion process and accumulative failure theory. The estimation methods of the model's parameters and the reliability assessment of the performance degradation products are performed. Finally, the data of drift voltage departing from zero of acoustic echosounder and measurement data of vibration amplitude of hydraulic coupler are studied, which demonstrates that this method is feasible and effective.

Key words: performance degradation, reliability evaluation, diffusion process, nonhomogeneous Poisson process

中图分类号:

TB114.3

翟亚利, 张志华, 邵松世. 多种退化机理作用下的产品可靠性建模[J]. 系统工程与电子技术, 2021, 43(6): 1714-1720.

Yali ZHAI, Zhihua ZHANG, Songshi SHAO. Reliability modeling of products based on multiple degradation mechanism[J]. Systems Engineering and Electronics, 2021, 43(6): 1714-1720.

图/表 6

表1

图1

图2

图3

图4

图5

参考文献 30

1	LIU L F , JI Z L , LUAN X . Performance degrada-tion model and prediction method of real-time remaining life for high temperature ceramic filter tube[J]. The Chinese Journal of Process Engineering, 2019, 19 (1): 162- 172.
2	SUN Y S, WANG L Z, WANG X B, et al. Reliability assessment method based on performance degradation data from multi-axial direction of motor[C]//Proc. of the 29th European safety and Reliability Conference(ESREL), 2019.
3	VERBERT K , SCHUTTER B D , BABUSKA R . Timely condition-based maintenance planning for multi-component systems[J]. Reliability Engineering and System Safety, 2017, 159, 310- 321. doi: 10.1016/j.ress.2016.10.032
4	YOUSUF A , HAKIM N . Investigation on chirping induced perfor-mance degradation in single mode directly modulated 1.55um DFB laser[J]. Journal of Optical Communications, 2019, 40 (1): 31- 36. doi: 10.1515/joc-2017-0015
5	WANG Z B , LI W Y , SHANG S , et al. Performance degradation comparisons and failure mechanism of silver metal oxide contact materials in relays application by simulation[J]. Eksploatacja I Niezawodnosc-Maintenance and Reliability, 2019, 22 (1): 86- 93. doi: 10.17531/ein.2020.1.10
6	PAN Y B , HONG R J , CHEN J , et al. Performance degradation assessment of a wind turbine gearbox based on multi-sensor data fusion[J]. Mechanism and Machine Theory, 2019, 137, 509- 526. doi: 10.1016/j.mechmachtheory.2019.03.036
7	LI H R , SUN J , MA H , et al. A novel method based upon modified composite spectrum and relative entropy for degradation feature extraction of hydraulic pump[J]. Mechanical Systems & Signal Processing, 2019, 114 (1): 399- 412.
8	GUO R X , SUI J F . Remaining useful life prognostics for the electrohydraulic servo actuator using hellinger distance based particle filter[J]. IEEE Trans.on Instrumentation and Measurement, 2020, 69 (4): 1148- 1158. doi: 10.1109/TIM.2019.2910919
9	QI J J, WANG D F, WANG L Q, et al. Performance reliability assessment method of a pump based on multi-performance parameters[C]//Proc. of the Prognostics and System Health Management Conference, 2019.
10	LI H R , SUN J , MA H , et al. A novel method based upon modified composite spectrum and relative entropy for degradation feature extraction of hydraulic pump[J]. Mechanical System & Signal Processing, 2019, 114 (1): 399- 412.
11	HYUNSEOK O , SEUNGHYUK C , KEUNSU K , et al. An empirical model to describe performance degradation for warranty abuse detection in portable electronics[J]. Reliability Engineering and System Safety, 2015, 142, 92- 99. doi: 10.1016/j.ress.2015.04.019
12	HUANG T T, WANG L, JIANG T M. Prognostics of products using time series analysis based on degradation data[C]//Proc. of the Prognostics & System Health Management Confe-rence, 2010.
13	LI Y Q , CHEN X R , LIU Y W , et al. Analytical modeling framework for performance degradation of PEM fuel cells du-ring startup-shutdown cycles[J]. RSC Advance, 2020, 10 (4): 2216- 2226. doi: 10.1039/C9RA09572A
14	WANG X , SUN Q . Consistency check of degradation mechanism between natural storage and enhancement test for missile servo system[J]. Journal of Systems Engineering and Electro-nics, 2019, 30 (2): 415- 424. doi: 10.21629/JSEE.2019.02.19
15	MA J M, ZHAN X Y, ZENG SH K. Real time reliability analysis based on the performance degradation data and Bayesian method[C]//Proc. of the International conference on Reliability, Maintainability & Safety, 2011: 90-94.
16	NOORTWIJK J M V . A survey of the application of Gamma processes in maintenance[J]. Reliability Engineering and System Safety, 2009, 94 (1): 2- 21. doi: 10.1016/j.ress.2007.03.019
17	WANG H , ZHOU Y W , JI Y , et al. Performance degradation assessment of rolling bearing based on Dirichlet process and continuous Markov model[J]. Journal of Jilin University (Engineering and Technology Edition), 2019, 49 (1): 117- 123.
18	DELIA M C , RAFAEL P O . A shock and wear system under environmental conditions subject to internal failures, repair, and replacement[J]. Reliability Engineering and System Safety, 2012, 99, 55- 61. doi: 10.1016/j.ress.2011.10.009
19	LI D W , ZHANG Z H , ZHONG Q H , et al. Performance deterioration modeling and optimal preventive maintenance strategy under scheduled servicing subject to mission time[J]. Chinese Journal of Aeronautics, 2014, 27 (4): 821- 828. doi: 10.1016/j.cja.2014.06.002
20	翟亚利, 张志华, 李大伟. 基于冲击理论的性能可靠性评估研究[J]. 系统工程与电子技术, 2014, 36 (10): 2108- 2112. doi: 10.3969/j.issn.1001-506X.2014.10.35
	ZHAI Y L , ZHANG Z H , LI D W . Performance reliability evaluation based on impact theory[J]. Systems Engineering and Electronics, 2014, 36 (10): 2108- 2112. doi: 10.3969/j.issn.1001-506X.2014.10.35
21	HU Y , LI H , SHI P , et al. A prediction method for the real-time remaining useful life of wind turbine bearings based on the Wiener process[J]. Renewable Energy, 2018, 127 (11): 452- 460.
22	翟亚利, 张志华, 李大伟. 具有漂移特征的退化可靠性评估方法研究[J]. 系统工程理论与实践, 2014, 34 (10): 2710- 2715. doi: 10.12011/1000-6788(2014)10-2710
	ZHAI Y L , ZHANG Z H , LI D W . The method about reliabi-lity evaluation based on degradation data with parameters digression feature[J]. Systems Engineering-Theory & Practice, 2014, 34 (10): 2710- 2715. doi: 10.12011/1000-6788(2014)10-2710
23	WANG R R , FENG H L . Lithiumion batteries remaining useful life prediction using Wiener process and unscented particle filter[J]. Journal of Power Electronics, 2020, 20 (1): 270- 278. doi: 10.1007/s43236-019-00016-3
24	刘强. 基于失效物理的性能可靠性技术及应用研究[D]. 长沙: 国防科学技术大学, 2011.
	LIU Q. Research on the performance reliability technology and the application based on physics of failure[D]. Changsha: National University of Defense Technology, 2011.
25	CHE H Y , ZENG S K , GUO J B , et al. Reliability modeling for dependent competing failure processes with mutually dependent degradation process and shock process[J]. Reliability Engineering & System Safety, 2018, 180 (12): 168- 178.
26	GAO H D , CUI L R , QIU Q G . Reliability modeling for degradation-shock dependence systems with multiple species of shocks[J]. Reliability Engineering & System Safety, 2019, 185 (5): 133- 143.
27	樊平毅. 随机过程理论与应用[M]. 北京: 清华大学出版社, 2006.
	FAN P Y . Stochastic processes theory and application[M]. Beijing: Tsinghua University Press, 2006.
28	张志华. 可靠性理论及工程应用[M]. 科学出版社, 2012: 298- 299.
	ZHANG Z H . Reliability theory and engineering application[M]. Beijing: Science press, 2012: 298- 299.
29	杜文久, 孙胜亮, 原坤. 改进的MCMC算法——DSY算法及其在估计IRT模型参数中的应用[J]. 心理科学, 2013, 36 (3): 734- 738.
	DU W J , SUN S L , YUAN K . Improvement of MCMC algorithm-DSY algorithm and its application in parameter estimation under the TRT model[J]. Journal of Psychological Science, 2013, 36 (3): 734- 738.
30	谭林, 程志君, 郭波. 基于风险的劣化系统最优检测策略[J]. 系统工程理论与实践, 2009, 29 (9): 108- 114.
	TAN L , CHENG Z J , GUO B . Optimal inspection policy for deteriorating system based on risk[J]. Systems Engineering-Theory & Practice, 2009, 29 (9): 108- 114.

时间/周	3	6	9	12	15	18
零位电压/mV	3.16	5.47	8.37	10.89	13.2	15.4

时间/周	21	24	27	30	33	36
零位电压/mV	19.7	20.5	23.9	26.1	27.7	31.5

[1]	史跃东, 金家善, 柴凯. 大型复杂系统多态可靠性快速评估算法[J]. 系统工程与电子技术, 2022, 44(10): 3282-3290.
[2]	陈宇奇, 徐廷学, 郝建平, 逯程, 李志强. 基于FDN的装备体系任务能力依赖性分析[J]. 系统工程与电子技术, 2021, 43(6): 1721-1728.
[3]	高泽海, 马存宝, 牛浩田. 综合模块化航电系统性能退化Lévy模型[J]. 系统工程与电子技术, 2021, 43(4): 1144-1152.
[4]	王婵, 王慧泉, 金仲和, 靳鑫. ZDPS-2卫星可靠性试验评估方法[J]. 系统工程与电子技术, 2019, 41(2): 453-458.
[5]	邵松世, 刘海涛, 张志华. 融合多源先验信息的舰船备件可靠性评估[J]. 系统工程与电子技术, 2019, 41(12): 2905-2910.
[6]	董文杰, 刘思峰, 方志耕, 曹颖赛, 张秦. 基于HGERT网络模型的退化型失效可靠性评估[J]. 系统工程与电子技术, 2019, 41(1): 208-214.
[7]	史跃东, 金家善, 徐一帆, 胡俊波. 基于发生函数的模糊多状态复杂系统可靠性通用评估方法[J]. 系统工程与电子技术, 2018, 40(1): 238-244.
[8]	翟亚利, 张志华, 邵松世. 退化产品失效规律分析及其应用[J]. 系统工程与电子技术, 2017, 39(6): 1420-1424.
[9]	凌冬怡, 王世海, 刘斌. 基于AADL体系结构模型的构件系统可靠性评估[J]. 系统工程与电子技术, 2017, 39(4): 947-952.
[10]	黄文平, 周经伦, 宁菊红, 金光. 基于变失效阈值的竞争失效可靠性模型[J]. 系统工程与电子技术, 2017, 39(4): 941-946.
[11]	王浩伟, 滕克难. 基于加速退化数据的可靠性评估技术综述[J]. 系统工程与电子技术, 2017, 39(12): 2877-2885.
[12]	蔡忠义, 陈云翔, 王莉莉, 罗承昆. 融合外场使用和加速寿命数据的可靠性评估方法[J]. 系统工程与电子技术, 2016, 38(6): 1476-1480.
[13]	黄金波, 孔德景, 崔利荣. 多阶段可校正系统退化建模与可靠性评估[J]. 系统工程与电子技术, 2016, 38(4): 965-969.
[14]	蔡忠义, 陈云翔, 张诤敏, 项华春. 基于比例失效率退化模型的可靠性评估方法[J]. 系统工程与电子技术, 2015, 37(8): 1943-1947.
[15]	蔡忠义, 陈云翔, 项华春, 董骁雄. 基于无失效数据的加权E-Bayes可靠性评估方法[J]. 系统工程与电子技术, 2015, 37(1): 219-223.