系统工程与电子技术 ›› 2022, Vol. 44 ›› Issue (4): 1085-1092.doi: 10.12305/j.issn.1001-506X.2022.04.03

• 电子技术 • 上一篇    下一篇

基于顺序统计滤波和二元积累的辐射源信号检测方法

赵忠凯1,2,*, 弓浩1, 张然3   

  1. 1. 哈尔滨工程大学信息与通信工程学院, 黑龙江 哈尔滨 150001
    2. 哈尔滨工程大学先进船舶通信与信息技术工信部重点实验室, 黑龙江 哈尔滨 150001
    3. 北京航天长征飞行器研究所, 北京 100076
  • 收稿日期:2021-04-13 出版日期:2022-04-01 发布日期:2022-04-01
  • 通讯作者: 赵忠凯
  • 作者简介:赵忠凯(1979—), 男, 副教授, 博士, 主要研究方向为雷达侦察与干扰、宽带信号检测与识别|弓浩(1996—), 男, 硕士研究生, 主要研究方向为宽带信号检测|张然(1991—), 女, 工程师, 硕士, 主要研究方向为雷达电子对抗与相位调制表面
  • 基金资助:
    国家自然科学基金(62071137)

Radiation source signal detection method based on ordered statistical filtering and binary accumulation

Zhongkai ZHAO1,2,*, Hao GONG1, Ran ZHANG3   

  1. 1. School of Information and Communication Engineering, Harbin Engineering University, Harbin 150001, China
    2. Key Laboratory of Advanced Ship Communication and Information Technology, Ministry of Industry and Information Technology, Harbin Engineering University, Harbin 150001, China
    3. Beijing Aerospace Long March Aircraft Research Institute, Beijing 100076, China
  • Received:2021-04-13 Online:2022-04-01 Published:2022-04-01
  • Contact: Zhongkai ZHAO

摘要:

现代雷达采用宽带线性调频、相位编码等低截获概率(low probability of interception, LPI)波形, 发射功率较低, 到达侦察接收机的辐射源信号信噪比较低, 给被动侦察带来了巨大的挑战。现有的被动检测方法在检测该类信号时, 存在一定的局限性, 比如算法复杂度高、计算量大和实时性较差等。针对上述问题, 提出了一种辐射源信号检测方法。在数字信道化预处理的基础上, 设计了适合在工程实现的并行流水线结构, 基于顺序统计滤波和二元积累完成检测, 提高了检测速度, 能够实现对低信噪比信号的恒虚警(constant false alarm rate, CFAR)检测。仿真试验证明了所提方法的有效性和正确性, 为辐射源信号检测提供了有力的理论支撑。

关键词: 顺序统计滤波, 二元积累, 恒虚警, 低信噪比, 数字信道化

Abstract:

Modern radars use broadband chirp, phase encoding and other low probability of interception(LPI) waveforms. Modern radars have low transmitting power, leading to low signal-to-noise ratio of the radiation source signal reaching the reconnaissance receiver, which brings a huge challenge to passive reconnaissance. Existing passive detection methods have certain limitations when detecting this type of signal, such as high algorithm complexity, large amount of calculation, and poor real-time performance. Aiming at the above problems, this paper proposes a method for detecting radiation source signals. On the basis of digital channelization preprocessing, a parallel pipeline structure suitable for engineering realization is designed. The detection is completed based on ordered statistical filtering and binary accumulation, which improves the detection speed and can realize the constant false alarm detection (CFAR) of low signal-to-noise ratio signals. The simulation test proves the validity and correctness of the proposed method, and provides a strong theoretical support for the detection of the radiation source signal.

Key words: ordered statistical filtering, binary accumulation, constant false alarm rate (CFAR), low signal-to-noise ratio, digital channelization

中图分类号: