系统工程与电子技术

• 传感器与信号处理 • 上一篇    下一篇

基于OS-CFAR的LFM脉压雷达多假目标干扰分析

柳向1, 李东生1, 刘庆林2   

  1. 1.电子工程学院504教研室, 安徽 合肥 230037; 2. 中国人民解放军95859部队, 甘肃 酒泉 735018
  • 出版日期:2017-06-23 发布日期:2010-01-03

Jamming technique of multiple false targets against linear frequency modulated pulse compression radar based on OS-CFAR

LIU Xiang1, LI Dongsheng1, LIU Qinglin2   

  1. 1. Department of 504, Electronic Engineering Institute, Hefei 230037, China;
    2. Unit 95859 of the PLA,Jiuquan 735018, China
  • Online:2017-06-23 Published:2010-01-03

摘要:

目前,对采用恒虚警检测的线性调频脉冲压缩雷达的干扰方法,主要针对采用均值类恒虚警检测的情形,而对于专门用于多假目标检测的有序统计类恒虚警(order-statistic constant false-alarm rate, OS-CFAR)检测器,尚未有专门的干扰方法出现。针对此问题,提出了一种专门针对OS-CFAR检测的多假目标产生方法。首先根据OS-CFAR检测原理进行干扰假目标设计,在此基础上提出利用间歇采样部分转发产生多假目标的方法,然后针对OS-CFAR检测的特点对干扰参数进行设置,合理安排干扰机位置或者移频后转发,在目标的左右检测单元产生了数量、幅度、空间分布可控的多假目标。仿真结果表明,该干扰方法可以有效降低目标在雷达检测端被发现的概率。

Abstract:

The jamming against to the linear frequency modulated pulse compression radar which always considers the mean level constant false-alarm rate detector, but the order-statistic constant false-alarm rate (OS-CFAR) detector is designed for the multiple false targets, and there is no specific jamming technique at present. A multiple false targets generation method specifically for the OS-CFAR detection is proposed. Firstly, according to the principle of the OS-CFAR detection, the design principle of multiple false targets based on interruptedsampling and partial periodic repeater jamming is proposed. Then, according to the detection characteristics of the OS-CFAR, the interference key parameters are set. After the placement of radar jammer position or the frequencyshift forwarding reasonably,as a result, multiple false targets with the quantity, amplitude and space distribution which can be controlled are produced around the true target.Simulation results show that the proposed jamming method can reduce the detection probability of the target effectively.