Systems Engineering and Electronics ›› 2024, Vol. 46 ›› Issue (11): 3703-3714.doi: 10.12305/j.issn.1001-506X.2024.11.12

• Sensors and Signal Processing • Previous Articles     Next Articles

ISAR imaging jamming method research based on frequency modulation slope change

Xiaoyi PAN1,2,*, Quan WANG2, Zhaoyu GU1, Jiyuan CHEN1, Xiaoming MENG3   

  1. 1. College of Electronic Science and Technology, National University of Defense Technology, Changsha 410073, China
    2. Unit 95841 of the PLA, Jiuquan 735000, China
    3. Shanghai Second Military Representative Bureau, Nanjing Military Representative Office of the Ministry of Army Equipment, Shanghai 200031, China
  • Received:2022-10-12 Online:2024-10-28 Published:2024-11-30
  • Contact: Xiaoyi PAN

Abstract:

In order to resist the advanced system inverse synthetic aperture radar (ISAR), an ISAR imaging jamming method based on frequency modulation slope change is proposed. Firstly, the influence of frequency modulation slope change on ISAR imaging is exploited, according to the wideband linear frequency modulation (LFM) signal model and processing flow of dechirping signal, revealing the basic mechanism by which its variation characteristic can be used for jamming. Then, the ISAR jamming signals with pseudo-random change of frequency modulation slope are formed and mixed with radar echo signals into radar, via using the pseudo-random change of the LFM signal bandwidth and pulse width in a certain range. Finally, the influence of frequency modulation slope change and the effectiveness of the proposed jamming method in ISAR imaging jamming are verified by simulation experiments.

Key words: frequency modulation slope, inverse synthetic aperture radar (ISAR) jamming, imaging jamming

CLC Number: 

[an error occurred while processing this directive]