Systems Engineering and Electronics ›› 2024, Vol. 46 ›› Issue (12): 3965-3972.doi: 10.12305/j.issn.1001-506X.2024.12.04

• Electronic Technology • Previous Articles    

Parameter estimation method based on NYFR sampling uniform linear array structure

Tao CHEN1,2, Yaopeng LIANG1,2, Yuwei YU1,2,*   

  1. 1. College of Information and Communication Engineering, Harbin Engineering University, Harbin 150001, China
    2. AVIC United Technology Center for Electromagnetic Spectrum Collaborative Detection and Intelligent Cognition, Aviation Industry Corporation of China, Harbin 150001, China
  • Received:2023-12-25 Online:2024-11-25 Published:2024-12-30
  • Contact: Yuwei YU

Abstract:

In order to overcome the influence of huge data volume caused by traditional Nyquist sampling, and to solve the problem of signal reception effectively in the wider band range and the estimation of signal carrier frequency (CF) and direction of arrival (DOA) parameters. An uniform linear array structure based on sampling of Nyquist folding receiver (NYFR) is proposed. Firstly, a multi-channel NYFR sampling array structure is constructed to receive the incident signal and process the fold sampling.Secondly, the phase consistency of the multi-channel NYFR sampling signal is analyzed and verified. Finally, simulation experiments are carried out in the unknown and known original Nyquist zone (NZ) of sigal source. The simulation experimental results show that the signal model under the array structure proposed in this paper is not only suitable for the CF and DOA joint estimation method, but also suitable for multiple DOA estimation algorithms, which verifies the correctness and effectiveness of the array structure.

Key words: uniform linear array, Nyquist folding receiver (NYFR), folding sampling, carrier frequency(CF) and direction of arrival (DOA) joint estimation

CLC Number: 

[an error occurred while processing this directive]