系统工程与电子技术 ›› 2026, Vol. 48 ›› Issue (11): 3736-3745.doi: 10.12305/j.issn.1001-506X.2026.11.05

• 电子技术 • 上一篇    下一篇

部件关联散射中心的动态散射特性建模方法

赵剑勃(), 闫华(), 黄起, 殷红成   

  1. 散射辐射全国重点实验室,北京 100854
  • 收稿日期:2025-10-20 修回日期:2026-01-08 接受日期:2026-01-23 出版日期:2026-10-25 发布日期:2026-06-15
  • 通讯作者: 闫华 E-mail:vphoton@163.com;yanhuabit@126.com
  • 作者简介:赵剑勃(2000—)男,硕士研究生,主要研究方向为雷达目标特性、电磁建模
    黄 起(1992—)男,高级工程师,博士,主要研究方向为散射中心建模、场景仿真
    殷红成(1967—)男,研究员,博士,主要研究方向为雷达目标特性、目标识别

Modeling method for dynamic scattering characteristics of component-related scattering center

Jianbo Zhao(), Hua Yan(), Qi Huang, Hongcheng Yin   

  1. National Key Laboratory of Scattering and Radiation,Beijing 100854,China
  • Received:2025-10-20 Revised:2026-01-08 Accepted:2026-01-23 Online:2026-10-25 Published:2026-06-15
  • Contact: Hua Yan E-mail:vphoton@163.com;yanhuabit@126.com

摘要:

针对电磁建模领域中非刚体目标电磁建模难题,提出一种部件关联散射中心的动态散射特性建模方法。对具有活动部件目标的局部运动,实现基于散射中心的动态散射特性快速生成。通过对目标几何模型进行分区离散化,借由散射中心的性质,确定散射中心与活动部件的对应关系,并以散射中心的运动代替模型几何上的运动变化,再通过包围盒函数进行遮挡判断,形成快速生成目标动态散射特性的技术。以直升机的螺旋桨转动为例,与传统高频计算和暗室测量实验结果对比表明,该建模方法具有较高的精度和显著提升的效率,可用于支撑具有活动部件动态目标的雷达探测与识别。

关键词: 散射中心, 动态散射特性, 雷达散射截面, 动态特性建模

Abstract:

Aiming to address the challenges of electromagnetic modeling for non-rigid targets, this study proposes a modeling method for dynamic scattering characteristics of component-related scattering centers. This approach enables the rapid generation of dynamic scattering characteristics by utilizing scattering centers to represent the local motions of targets with movable components. Through zoning and discretization of the geometric model of the target, the correspondence between scattering centers and movable components is established by leveraging the attributes of scattering centers. The geometric motion variations are thereby approximated by the movements of these scattering centers. Occlusion judgments are subsequently performed using bounding volume functions, forming a technique for the efficient generation of dynamic scattering characteristics. Taking the rotation of a helicopter’s rotor blades as an example, comparisons with traditional high-frequency computational methods and anechoic chamber measurement results demonstrate that the proposed modeling approach achieves high accuracy and significantly enhanced efficiency, making it suitable for supporting radar detection and recognition of dynamic targets with movable components.

Key words: scattering center, dynamic scattering characteristic, radar cross section, dynamic characteristic modeling

中图分类号: