[1] Berizzi F,Dalle Mese E,Diani M,et al.High-resolution ISAR imaging of maneuvering targets by means of range instantaneous Doppler technique:modeling and performance analysis[J].IEEETrans.on Image Process,2001,10(12),1880-1890. [2] 邢孟道,保铮.外场实测数据的舰船目标ISAR成像[J].电子与信息学报,2001,23(12):1271-1277. [3] Thayaparan T,Lampropoulos G,Wong S K,et al.Application of adaptive joint time-frequency algorithm for focusing distorted ISAR images from simulated and measured radar data[J].IEEE Proc.of Radar Sonar Navigation,2003,150(4):213-220. [4] Rose Ranjian,Freedman Araham,Steinberg Bernard D.Sequence CLEAN:a modified deconvolution technique for microwave images of contiguous targets[J].IEEE Trans.on AES,2002,38(1):89-97. [5] Tsao Jenho,Steinberg Bernard D.Reduction of sidelobe and speckle artifacts in microwave imaging:the CLEAN technique[J].IEEE Trans.on A & P,1998,36(4):543-556. [6] Chen Victor C,Lipps Ronald.ISAR imaging of small craft with roll,pitch and yaw analysis[C]//IEEE international Radar Conference,2000:493-498. [7] 保铮,孙常印,邢孟道.机动目标的逆合成孔径雷达成像原理与算法[J].电子学报,2006,28(6):24-28. [8] 卢光跃,保铮.机动目标ISAR距离瞬时多普勒成像实现方法[J].系统工程与电子技术,1999,21(7):30-32.(Lu Guangyue,Bao Zheng.Realization of ISAR range-instantaneons-Doppler imaging of man euvering target[J].Systems Engineering and Electronics,1999,21(7):30-32.) [9] Jeong Ho-Ryung,Kim Hyo-Tae,Kim Kyung-Tae.Application of subarray averaging and entropy minimization algorithm to stepped-frequency ISAR autofocus[J].IEEE Trans.on Antennas Propag.,2008,56(4):1144-1154. [10] Martorella M,Berizzi F,Haywood B.Contrast maximization based technique for 2-D ISAR autofocusing[J].IEEE Proc.of Radar,Sonar and Navigation,2005,152(4):253-262. [11] 卢光跃,保铮.ISAR成像中具有游动部件目标的包络对齐[J].系统工程与电子技术,2000,22(6):12-14.(Lu Guangyue,Bao Zheng.Range alignment for targets with moving parts in ISAR imaging[J].Systems Engineering and Electronics,2000,22(6):12-14.) [12] 保铮,邢孟道,王彤.雷达成像技术[M].北京:电子工业出版社,2004. [13] Thayaparan T,Stankovi L J,Dakovi M.Focusing distorted ISAR images using the S-method[C]//Canadian Conference on Electrical and Computer Engineering,Ottawa,2006:56-69. |