系统工程与电子技术 ›› 2018, Vol. 40 ›› Issue (5): 1160-1166.doi: 10.3969/j.issn.1001-506X.2018.05.31

• 软件、算法与仿真 • 上一篇    下一篇

情报驱动的平行仿真实体动态生成方法

周芳, 楚威,  丁冉   

  1. 中国电子科技集团公司第二十八研究所信息系统工程重点实验室, 江苏 南京 210007
  • 出版日期:2018-04-28 发布日期:2018-04-25

Intelligence driven dynamic generation method for parallel simulation entity

ZHOU Fang, CHU Wei, DING Ran   

  1. Information System Important Laboratory, The 28th Research Institute of China Electronics Technology Group Corporation, Nanjing 210007, China
  • Online:2018-04-28 Published:2018-04-25

摘要:

针对战场态势信息不完备、不精准条件下平行仿真实体模型匹配不精准等难题,提出了情报驱动的平行仿真实体动态生成方法。首先,建立了一套平行仿真实体的组件化模型体系,提出基于元数据的模型描述方法。然后,提取实时情报的运行状态特征数据,建立战场实体行为规则,基于行为规则实现仿真模型与情报数据间动态匹配。在此基础上,建立平行仿真实体模型组件间信息交互关系表,采用仿真中间件实时更新组件间信息交互关系,并动态加载组件描述信息与组件执行体,实现平行仿真实体动态生成。最后,以某区域联合作战为例,利用所提方法动态匹配和组合平行仿真实体模型组件,验证了所提方法的有效性。

Abstract:

Considering the problem of the imprecise matching of the parallel simulation entity model under the condition of incomplete and imprecise information for the battlefield situation, an intelligence driven dynamic generation method for parallel simulation entity is proposed. Firstly, a componentized model system for a parallel simulation entity is established,and a model description method based on metadata is proposed. Then, the running status feature data from realtime intelligence is extracted, the rules of battlefield entity behavior are established, and the dynamic matching between the simulation model and intelligence data is realized based on rules. Then on the basis of these, the information interaction relationship table between parallel simulation entity model components is set up. This table is updated through the simulation middleware in real time, and the description information and the executive body of components are dynamically loaded, realizing the purpose of the parallel simulation entity dynamically generated. Finally, take the joint operation of a region as an example, use the proposed method to dynamically match the simulation model and combine parallel simulation entity model components, in order to verify the effectiveness of the proposed method.