系统工程与电子技术

• 传感器与信号处理 • 上一篇    下一篇

基于LFM子脉冲的宽带雷达目标回波模拟方法

张武才, 潘明海, 陈诗弘   

  1. 南京航空航天大学电子信息工程学院, 江苏 南京 210016
  • 出版日期:2017-03-23 发布日期:2010-01-03

Method of wide band radar target echo signal simulation based on LFM subpulse

ZHANG Wucai, PAN Minghai, CHEN Shihong   

  1. College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
  • Online:2017-03-23 Published:2010-01-03

摘要:

在宽带雷达目标回波信号的半实物计算中,需要同时满足实时性和仿真精度的要求。提出一种基于线性调频(linear frequency modulation,LFM)子脉冲的宽带雷达目标回波模拟方法,将LFM脉冲信号分成若干个窄带、短时线性调频子脉冲,通过计算各个子脉冲对应的目标回波信号,来重构全脉冲的宽带目标回波信号。采用这种方法可大幅度减少算法的运算量,显著降低了算法对硬件资源的要求,提高了算法的实时性。计算机仿真结果证明了方法的可行性并具有较高的计算精度。

Abstract:

In the hardware in the loop calculation of the wideband radar target echo signal, the system needs to meet the requirements of real time and simulation accuracy simultaneously. A method of wideband radar target echo signal simulation based on linear frequency modulation (LFM) sub pulse is proposed, which divides the LFM pulse signal into several narrowband and shortterm linear frequency modulation pulses, and reconstructs the broadband target echo signal of the full pulse by calculating the target echo signal which corresponds to each subpulse. The computational load and the requirement for the hardware resources of the algorithm can be efficiently reduced, thus the real time performance of the algorithm is improved as well. The computer simulation demonstrates that this method is feasible and has high calculation accuracy.