系统工程与电子技术

• 系统工程 • 上一篇    下一篇

基于生产线平衡的导弹技术准备流程优化

吕卫民1, 胡文林2, 王哲1, 胡冬1   

  1. 1. 海军航空工程学院七系, 山东 烟台 264001;
    2. 海军航空工程学院研究生管理大队, 山东 烟台 264001
  • 出版日期:2016-06-24 发布日期:2010-01-03

Missile technical preparation process optimization of based on line balancing

Lü Wei-min1, HU Wen-lin2, WANG Zhe1, HU Dong1   

  1. 1. The 7th Department, Naval Aeronautical Engineering Institute, Yantai 264001, China;
    2. Graduate Student’s Brigade, Naval Aeronautical Engineering Institute, Yantai 264001, China
  • Online:2016-06-24 Published:2010-01-03

摘要:

基于工业工程的生产线平衡理论与方法,用平衡率和平滑性指数定量描述了导弹技术准备流程的线平衡效果,建立了线平衡的效费比模型,确定了瓶颈工作站作业时间的平衡区间,再结合技术准备工艺要求,应用消除、组合、重组、简化(eliminate combination rearrange simplify, ECRS)原则重组了工艺路线,然后引入了网络计划图,找到了瓶颈工作站的关键路径和工序,参照ECRS原则对该工序进一步重组,以此最终优化技术准备工作流程。

Abstract:

Based on the line balancing theory and method in the industrial engineering, the effect of the missile technical preparation process is quantitatively described by the line balancing rate and the smoothness index. The costefficiency ratio model is established to determine the balancing range of the working time of the bottleneck workstation. The route of the technical preparation process is rearranged using the eliminate combination rearrange simplify (ECRS) principle according to operational requirements. The critical path and its working procedures are proposed based on the network graph. The working procedures are rearranged further according to the ECRS principle, and finally the technical preparation process is optimized.