Journal of Systems Engineering and Electronics ›› 2011, Vol. 33 ›› Issue (7): 1503-1509.doi: 10.3969/j.issn.1001-506X.2011.07.14

• 传感器与信号处理 • 上一篇    下一篇

两维数字阵列雷达的数字单脉冲测角方法

朱伟, 陈伯孝, 周琦   

  1. 西安电子科技大学雷达信号处理国家重点实验室, 陕西 西安 710071
  • 出版日期:2011-07-19 发布日期:2010-01-03

Angle measurement method with digital monopulse for dimensional digital array radar

ZHU Wei, CHEN Bai-xiao, ZHOU Qi   

  1. National Lab of Radar Signal Processing, Xidian University, Xi’an 710071, China
  • Online:2011-07-19 Published:2010-01-03

摘要:

研究了两维数字阵列雷达的数字单脉冲测角方法,分析了基本单脉冲测角过程中存在的问题,提出了改进的数字单脉冲测角方法。该方法在差波束形成过程中考虑了不同工作频率、不同波位的天线等效孔径的变化。针对测角误差信号的非线性特征,在根据误差信号计算目标角度时采用了多阶多项式拟合的方法,给出了数字阵列雷达中数字单脉冲测角的详细过程。计算机仿真和实测结果表明,此方法具有良好的测角性能,减少了对单脉冲测量误差曲线的存储要求,适合于工程实际应用。

Abstract:

The angle measurement method with digital monopulse for 2dimensional digital array radar is studied. The problems in the process of digital monopulse measurement are analyzed and an improved angle measurement method with digital monopulse is proposed. The variations of equivalent aperture of antenna array with different frequencies and different beam positions are taken into account in the process of difference patterns synthesis. A multiorder polynomial fitting method is adopted to calculate the target’s angle according to the angle error signal whose characteristic is nonlinear. The detailed process of angle measurement method with digital monopulse for digital array radar is given. The simulation results and the actual measurements show that the method has a good performance in angle estimate. Because of the less memory needed by the error curves, the method is suitable for the project.