Journal of Systems Engineering and Electronics ›› 2010, Vol. 32 ›› Issue (9): 1807-1810.doi: 10.3969/j.issn.1001-506X.2010.09.04

• 电子技术 • 上一篇    下一篇

双基地MIMO雷达参数辨识性分析

刘志国1,廖桂生1,王亚利2   

  1. 1. 西安电子科技大学雷达信号处理国家重点实验室, 陕西 西安 710071;2. 空军工程大学理学院, 陕西 西安 710051
  • 出版日期:2010-09-06 发布日期:2010-01-03

Analysis of parameter identifiability about bistastic MIMO radar

LIU Zhi-guo1,LIAO Gui-sheng1,WANG Ya-li2     

  1. 1. National Lab of Radar Signal Processing, Xidian Univ., Xi’an 710071, China;
    2. Faculty of Science, Air Force Engineering Univ., Xi’an 710051, China
  • Online:2010-09-06 Published:2010-01-03

摘要:

与传统的相控阵雷达不同,多输入多输出(multiple input multiple output, MIMO)雷达可以发射彼此正交的信号来形成独立信道,通过将各信道内的目标雷达反射截面积(radar cross section, RCS)进行平均可以有效抑制目标衰落,进而提高其参数辨识性能。根据给出的双基地MIMO雷达系统模型,对系统最多可分辨和定位目标的数目进行分析,并给出理论证明。分析表明,利用目标反射系数的非相关特性,双基地MIMO雷达最多可有效分辨和定位收发阵元数的乘积减1个目标。仿真实验证明了结论的正确性。

Abstract:

Unlike conventional radar systems, multiple input multiple output (MIMO) radar can transmit orthogonal signals each other to form decorrelated channels. Its great potential on combating with target fades by averaging the target radar cross sections (RCSs) on each decorrelated channels is shown, and hence the system performance is significantly improved. Based on the bistatic MIMO radar system model, an analysis on the parameter identifiability of MIMO radar is given. By exploiting the uncorrelation of reflection coefficient of the targets, the maximum numbers of targets that could be uniquely identified by the MIMO radar is the product of the numbers of receive and transmit elements minus one. Finally, computer simulation results validate the effectiveness of analysis.