Journal of Systems Engineering and Electronics ›› 2010, Vol. 32 ›› Issue (8): 1624-1629.doi: 10.3969/j.issn.1001-506X.2010.08.15

• 传感器与信号处理 • 上一篇    下一篇

一种基于匹配信号变换的有效抗干扰算法

黄瑞光1,张超1,董士伟2   

  1. (1. 华中科技大学电信系, 湖北 武汉 43007;
    2. 中国航天科技集团五院五〇四所空间微波技术国家重点实验室, 陕西 西安 710100)
  • 出版日期:2010-08-13 发布日期:2010-01-03

Effective algorithm of interference suppression based on matched signal transforms

HUANG Rui-guang1, ZHANG Chao1, DONG Shi-wei2   

  1. (1. Dept. of Electronics and Engineering, Huazhong Univ. of Science and Technology, Wuhan 430074, China; 2. National Key Lab of Space Microwave Technology, Xi’an Inst. of Space Radio Technology, China Aerospace Science Corporation, Xi’an 710100, China)
  • Online:2010-08-13 Published:2010-01-03

摘要:

针对直接序列扩频(direct sequence spread-spectrum, DSSS)系统中可能出现的chirp-like干扰,提出了一种有效的基于匹配信号变换(matched signal transform, MST)的干扰抑制算法——峰值保留法。该算法是根据已有的MST快速实现方案和陷波滤波抗干扰算法而设计的。仿真结果表明,该算法能够有效抑制DSSS系统中线性、非线性chirp-like干扰。与其他一些抗干扰算法的仿真比较表明,该算法具有稳健性强、计算量小、误码性能好、实现更为简单等优点,具有较好的应用前景。

Abstract:

Aiming at the chirp-like interference that may appear in the direct sequence spread-spectrum (DSSS) system, an effective algorithm of interference suppression based on matched signal transform (MST) is presented, which is the peek-value holding algorithm. This algorithm is developed according to the fast scheme of MST as well as the masking anti-jamming algorithm. The simulation results indicate that this algorithm can effectively suppress linear or non-linear chirp-like interference in DSSS system. Compared with some other anti-jamming algorithms, the proposed algorithm predominates in bit-error rate, robustness, calculation complicacy and implementation, so it has a wide application prospect.