系统工程与电子技术 ›› 2023, Vol. 45 ›› Issue (4): 950-957.doi: 10.12305/j.issn.1001-506X.2023.04.02

• 电子技术 • 上一篇    

基于信号随机涨落特征的电路噪声优化方法

唐玉俊1,2, 张竞文1,2, 蔡萍1,2, 胡琸悦1, 倪歆玥1,*, 陈凡胜1,3   

  1. 1. 中国科学院上海技术物理研究所中国科学院智能红外感知重点实验室, 上海 200083
    2. 中国科学院大学, 北京 100049
    3. 中国科学院大学杭州高等研究院, 浙江 杭州 310024
  • 收稿日期:2022-02-09 出版日期:2023-03-29 发布日期:2023-03-28
  • 通讯作者: 倪歆玥
  • 作者简介:唐玉俊(1986—), 男, 副研究员, 博士研究生, 主要研究方向为红外相机低噪声系统
    张竞文(1998—), 女, 硕士研究生, 主要研究方向为小型化高灵敏度高帧频红外探测系统
    蔡萍(1988—), 女, 助理研究员, 博士研究生, 主要研究方向为红外相机通信系统技术
    胡琸悦(1995—), 女, 博士后, 博士, 主要研究方向为高精度红外辐射定标技术
    倪歆玥(1994—), 男, 博士后, 博士, 主要研究方向为多维红外探测技术
    陈凡胜(1978—), 男, 研究员, 博士, 主要研究方向为极限红外探测技术

Circuit noise optimization method based on signal random fluctuation characteristics

Yujun TANG1,2, Jingwen ZHANG1,2, Ping CAI1,2, Zhuoyue HU1, Xinyue NI1,*, Fansheng CHEN1,3   

  1. 1. Key Laboratory of Intelligent Infrared Perception, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083, China
    2. University of Chinese Academy of Sciences, Beijing 100049, China
    3. Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, China
  • Received:2022-02-09 Online:2023-03-29 Published:2023-03-28
  • Contact: Xinyue NI

摘要:

低噪声电路设计是遥感领域的主要研究方向之一。由于采用信息获取电路和探测器组件分离设计,可持续发展科学卫星一号主载荷热像仪存在多路信号串扰与旁路互感干扰的问题。当前,基于传统恒定直流分析方法的电路噪声模型难以准确评估电路噪声大小,导致系统在工作时噪声性能过低。针对该问题, 分析了模拟电路信号传输的涨落变化规律,提出一种基于探测器响应具备高斯分布特征的类交流分析方法,构建信号噪声模型。与传统直流分析方法相比, 所提方法的噪声预测精度提升了51.42%, 优化后信息获取电路噪声的性能提升了21.44%, 相机噪声等效温差可达34 mK。所提出的电路噪声模型对红外探测系统性能的优化具有十分重要的意义。

关键词: 低噪声电路设计, 互感干扰, 信号串扰, 信号非均匀性

Abstract:

Low-noise circuit design is one of the main research area of space remote sensing. The wain load thermal imager in the Sustainable Development Science Satellite 1 is subject to multi-channel signal crosstalk and bypass mutual inductance interference due to the separation design of information acquisition circuit and detector component. However, it is difficult for current circuit noise models based on traditional constant direct-current analysis method to accurately assess the level of circuit noise, which leads to the system's low noise performance. In response to this issue, this paper analyzes the fluctuation change law of the signal transmission of the analog circuit, and proposes a similar alternating current analysis method based on the Gaussian distribution of the detector response characteristics. Compared with the traditional direct-current analysis method, the noise prediction accuracy of the proposed method is improved by 51.42%, and the noise performance of the information acquisition circuit is improved by 21.44% after the optimized design. The system noise equivalent temperature difference can reach 34 mK. The proposed circuit noise model is of great significance to the optimization of infrared detection system performance.

Key words: low noise circuit design, mutual inductance interference, signal crosstalk, signal non-uniformity

中图分类号: