产品维修性设计的系统工程方法

doi:10.3969/j.issn.1001-506X.2020.05.30

Abstract

Abstract:

In order to reflect the user's requirements systematically, comprehensively and accurately, and improve the relationship between maintenance requirements and product design characteristics, a standardized mapping method with maintenance requirements, maintainability requirements and product design characteristics is proposed. Firstly, the user's requirements are identified through the processing of the user's statement and the analysis based on heuristic questions. Then, the analysis of the maintenance design is performed based on the systems engineering method. Finally, the user's requirements are converted to design elements by the quality function deployment(QFD).The method is applied to the maintainability design of the console of the universal unmanned aerial vehicle (UAV) control seat for providing a trade-off basis for generating a system layout that meets user's requirements, and the result shows that this method improves the design accuracy and efficiency while reducing the design errors in requirement converting. The feasibility of this method is verified.

Key words: maintainability design, requirements analysis, product design characteristic, quality function deployment (QFD), systems engineering method

CLC Number:

Zhenyu ZHOU, Yuehong QIAN, Yi LIU. Systems engineering method in product maintainability design[J]. Systems Engineering and Electronics, 2020, 42(5): 1197-1204.

Figures/Tables 12

Fig.1

Fig.2

Fig.3

Table 1

Table 2

Table 3

Table 4

Fig.4

Table 5

Table 6

Fig.5

Fig.6

References 26

1	MIL-HDBK-470A. Designing and developing maintainable pro-ducts and systems[S]. Washington: Department of Defense Handbook, 1997.
2	DEN B R . User-centered design of smart products[J]. Ergonomics, 1997, 40 (10): 1159- 1169.
3	杨为民. 可靠性,维修性,保障性总论[M]. 北京: 国防工业出版社, 1995.
	YANG W M . General of reliability, maintainability, supportability[M]. Beijing: National Defense Industry Press, 1995.
4	ERES M H , BERTONI M , KOSSMANN M , et al. Mapping customer needs to engineering characteristics: an aerospace perspective for conceptual design[J]. Journal of Engineering Design, 2014, 25 (1/3): 64- 87.
5	SADEH E. Societal impacts of the Apollo program[EB/OL].[2019-04-10].http://www.astrosociology.com/Library/PDF/Impacts_adeh.pdf.
6	EIA632. Processes of engineering a system[S]. New York: US-ANSI, 1998.
7	ARP 4754A.Guidelines for development of civil aircraft and systems[S].Warrendale: SAE International, 2010.
8	马小骏, 彭焕春. 系统工程在大型客机运行支持系统研制中的应用[J]. 航空学报, 2019, 40 (1): 522736- 522736.
	MA X J , PENG H C . Review on development of commercial aircraft operation support system based on system engineering[J]. ActaAeronautica et Astronautica Sinica, 2019, 40 (1): 522736- 522736.
9	ISO/IEC15288. Systems and software engineering-system life cycle processes[S]. Geneva: International Electro Technical Commission, 2008.
10	INCOSE-TP-2003-002-03.2.2. Systems engineering handbook: a guide for system life cycle processes and activities, version 3.2.2[S]. San Diego: International Council on Systems Engineering, 2012.
11	高明君, 郝建平, 刘继民, 等. 基于系统工程过程的维修性设计要求生成过程研究[J]. 工程设计学报, 2010, 17 (2): 81- 85.
	GAO M J , HAO J P , LIU J M , et al. Generation process of maintainability design requirements based on system engineering process[J]. Journal of Engineering Design, 2010, 17 (2): 81- 85.
12	王增强, 李延来, 蒲云. 质量功能展开中顾客需求与工程特性的关联度确定方法[J]. 计算机集成制造系统, 2013, 19 (8): 2066- 2074.
	WANG Z Q , LI Y L , PU Y . Relationship values determination of customer requirements and engineering characteristics in QFD[J]. Computer Integrated Manufacturing Systems, 2013, 19 (8): 2066- 2074.
13	ZHANG X W , TONG S R , ERES M H , et al. A value-focused approach for establishing requirements'specification of commercial aircraft[J]. Proceedings of the Institution of Mechanical Engineers, 2014, 228 (G11): 2033- 2044.
14	国志刚,李会.基于QFD的产品维修性设计要求生成技术[C]//航空装备维修技术及应用研讨会论文集, 2015: 655-661.
	GUO Z G, LI H. Design of product maintainability requirements generation technology based on QFD[C]//Proc.of the Conference on Aviation Equipment Maintenance Technology and Application, 2015: 655-661.
15	ZHANG X W , TONG S R , ERES M H , et al. Towards avoiding the hidden traps in QFD during requirements establishment[J]. Journal of Systems Science and Systems Engineering, 2015, 24 (3): 316- 336.
16	ZHANG X W , AURIOL G , ERES M H , et al. A prescriptive approach to qualify and quantify customer value for value-based requirements engineering[J]. International Journal of Computer Integrated Manufacturing, 2013, 26 (4): 327- 345.
17	张新卫, 王克勤, 同淑荣. 支持价值驱动设计的顾客需求价值建模[J]. 计算机集成制造系统, 2014, 20 (10): 2340- 2347.
	ZHANG X W , WANG K Q , TONG S R . Value modeling of customer needs to support value-driven design[J]. Computer Integrated Manufacturing Systems, 2014, 20 (10): 2340- 2347.
18	杨多明, 阮镰. 系统工程与质量功能展开的综合应用研究[J]. 北京航空航天大学学报, 1998, 24 (3): 362- 364.
	YANG D M , RUAN L . Comprehensive application research on system engineering and QFD[J]. Journal of Beijing University of Aeronautics and Astronautics, 1998, 24 (3): 362- 364.
19	刘继民, 黄金波, 刘立泽, 等. 质量功能展开在生成装备维修性设计要求中的应用[J]. 机械制造, 2006, 44 (8): 59- 61.
	LIU J M , HUANG J B , LIU L Z , et al. Application of QFD in generating equipment maintenance design requirements[J]. Machinery, 2006, 44 (8): 59- 61.
20	肖艳玲. 系统工程理论与方法[M]. 北京: 石油工业出版社, 2012: 1- 227.
	XIAO Y L . System engineering theory and method[M]. Beijing: Petroleum Industry Press, 2012: 1- 227.
21	郭鹏飞, 郑怀洲, 于春风, 等. 基于QFD的工程机械维修性设计要求分析[J]. 科技导报, 2011, 29 (34): 50- 53.
	GUO P F , ZHENG H Z , YU C F , et al. Design requirements for construction machinery maintainability based on QFD[J]. Science & Technology Review, 2011, 29 (34): 50- 53.
22	WANG X T , XIONG W . Rough AHP approach for determining the importance ratings of customer requirements in QFD[J]. Computer Integrated Manufacturing Systems, 2010, 16 (4): 763- 771.
23	WANI M F , GANDHI O P . Development of maintainability index for mechanical system[J]. Reliability Engineering & System Safety, 1999, 65 (3): 663- 668.
24	TJIPARURO Z , THOMPSON G . Review of maintainability design principles and their application to conceptual design[J]. Proceedings of the Institution of Mechanical Engineers, 2004, 218 (E2): 103- 113.
25	YAMASHINA H , ITO T , KAWADA H . Innovative product development process by integrating QFD and TRIZ[J]. Internatio-nal Journal of Production Research, 2002, 40 (5): 1031- 1050.
26	BHATTACHARYA A , SARKAR B , MUKHERJEE S K . Integrating AHP with QFD for robot selection under requirement perspective[J]. International Journal of Production Research, 2005, 43 (17): 3671- 3685.

	用户需求	①	②	③	④	⑤	⑥
使用阶段	任务时间		√
	待命时间				√
	维修时间	√	√	√	√	√	√
维修活动	机务准备	√	√			√	√
	预防性维修	√		√	√
	修复性维修	√	√	√	√	√	√
维修级别	基层级	√	√	√	√	√	√
	中继级
	基地级
维修保障资源	维修人员	√	√	√	√	√	√
	维修器材	√	√	√	√	√	√
	维修设施		√		√		√
	技术资料	√					√

用户需求	标准化的需求	类型	揭示的隐含需求
①	最简化计算机板卡及线缆拆装	真实需求	最大化可维护性,最少化维修工时,最小化维修人员,最大化设备完好
②	最简化设备调试及维修	真实需求
③	有序铺设线缆	实现方式
④	最少化单个设备拆装时间	真实需求
⑤	具备良好的操作台接近及维修空间	真实需求	工作时间,最优化维修效率
⑥	进行基层级维修时,最小化维修工作量	真实需求	工作时间,最优化维修效率

用户需求	①	②	③	④	⑤	⑥
需求权重	0.25	0.15	0.25	0.15	0.1	0.1

用户需求	可达性	可视性	防差错措施	识别标记	维修安全	检测诊断准确	人因工程	操作空间	维修通道	平均修复时间/h	平均系统恢复时间/h
①	5	5	3	3	3	3	3	5	3	5	5
②	5	5	1	1	1	3	1	3	3	5	5
③	3	5	5	5	1	3	0	3	3	5	5
④	5	5	0	0	3	1	3	5	5	3	5
⑤	3	3	3	3	1	3	1	3	3	5	5
⑥	5	5	3	3	1	3	3	3	3	5	5
相对重要度	0.101 8	0.110 4	0.071 6	0.072 1	0.069 8	0.084 6	0.079 4	0.101 1	0.080 1	0.114 3	0.114 8

维修性要求	外形尺寸	设备布置	紧固方式	线缆铺设	故障检测
可视性	5	3	0	3	0
可达性	5	5	0	3	0
防差错措施	1	3	0	5	0
识别标记	1	3	0	3	0
维修安全	3	3	3	1	0
检测诊断	1	3	0	3	5
人因工程	3	3	3	1	0
操作空间	5	3	3	3	0
维修通道	3	3	0	5	0
平均恢复时间/h	3	5	1	3	5
平均系统恢复时间/h	3	5	1	3	5
相对重要度	0.217	0.272	0.121	0.218	0.172

Systems engineering method in product maintainability design

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 12

References 26

Related Articles 5

Recommended Articles

Metrics

Comments

[1]	PAN Xing, ZHANG Zhenyu, ZHANG Manli, ZHANG Guozhong. Research on RMS demonstration method of equipment SoS Based on SoSE [J]. Systems Engineering and Electronics, 2019, 41(8): 1771-1779.
[2]	LIN Mu, LI Xiaobo, WANG Yanfeng, ZHU Yifan. Capability effectiveness evaluation of contribution ratio to system-of-systems based on QFD and combination weights TOPSIS [J]. Systems Engineering and Electronics, 2019, 41(8): 1802-1809.
[3]	FU Qiang, WANG Gang, GUO Xiang-ke, LIU Chang-yun, ZHANG Xiao-kuan. Requirements analysis on collaborative detection and tracking of near space high speed targets [J]. Systems Engineering and Electronics, 2015, 37(4): 757-762.
[4]	SONG Tie-niu, LIN Ting-yu, CHAI Xu-dong, QU Hui-yang, LI Tan, GU Mu. Unified modeling method of complex heterogeneous systems for simulation-based acquisition [J]. Journal of Systems Engineering and Electronics, 2012, 34(10): 2075-2083.
[5]	WANG Zhi-xue, DONG Qing-chao, CHEN Bin, CHEN Jian. Analysis and verification of C⁴ISR system capability requirements based on UML model [J]. Journal of Systems Engineering and Electronics, 2009, 31(9): 2167-2171.

维修性要求	外形尺寸	设备布置	布线槽	紧固方式	线缆铺设	故障检测
相对重要度	0.182	0.229	0.182	0.083	0.191	0.132