[1] Ninness B,Goodwin G C.Estimation of model quality[J].Automatica,1995,31 (12):32-74.
[2] Gevers M.A personal view of the development of system identification[J].IEEE Control Systems Magazine,2006,26(6):93-105.
[3] Gevers M.Identification for control[C]//Plenary lecture at the 5th.IFAC Symp.on Adaptive Control and Signal Processing,Budapest,1995:1-12.
[4] Gevers M.Identification for control:from the early achievements to the revival of experiment design[J].European Journal of Control,2005,11:1-18.
[5] Milanese M,Taragna M.H∞ set membership identification:a survey[J].Automatics,2005,41(12):2019-2032.
[6] Hjalmarsson H.From experiment design to closed-loop control[J].Automatics,2005,41(3):393-438.
[7] Wahlberg B,Ljung L.Design variables for bias distribution in transfer function estimation[J].IEEE Trans.on Automatic Control,1986,31(2):134-144.
[8] Hjalmarsson H,Gevers M,Bruyne F D.For model-based control design,closed-loop identification gives better performance[J].Automatics,1996,32(12):1659-1673.
[9] Ljung L.Asymptotic variance expressions for identified blackbox transfer function models[J].IEEE Trans.on Automatic Control,1985,30(9):834-844.
[10] Zhu Y C.Multivariable process identification for MPC:the asymptotic method and its applications[J].Journals of Process control,1998,8(2):101-115.
[11] Gervers M,Ljung L,Van den hof P M J.Asymptotic variance expressions for closed-loop identification[J].Automatica,2001,37(5):781-786.
[12] Cooley B L,Lee J H.Control-relevant experiment design for muhivariable systems described by expansions in orthonormal bases[J].Automatica,2001,37(2):273-281.
[13] Ninness B,Hjalmarsson H.The analysis of variance error:Quantifications exact for finite model order[C]//IEEE Conference on Decision and Control.Hawaii,USA,2003.
[14] Ninness B,Hjalmarsson H.Variance error quantifieations that are exact for finite-model order[J].IEEE Trans.on Automatic Control,2004,49(8):1275-1291.
[15] Gevers M,Miskovic L,Bonvin D,et al.Identification of multiinput systems:variance analysis and input design issues[J].Automatica,2006,42(4):559-572.
[16] Chiuso A.Asymptotic variance of closed-loop subspace identification methods[J].IEEE Trans.on Automatic Control,2006,51 (8):1299-1314.
[17] Bombois X,Anderson B D O,Gevers M.Quantification of frequency domain error bounds with guaranteed confidence level in Prediction Error Identification[J].System and Control Letters,2005,54(5):471-482.
[18] Ninness B,Hjalmarsson H.On the frequency domain accuracy of closed-loop estimates[J].Automatics,2005,41 (7):1109-1122.
[19] Gevers M.Connecting identification and robust control:A new challenge[C]//9th IPAC Syrup on System Identification,1991:1-10.
[20] Canale M,Malan S A,Milanese M.Model quality evaluation in identification for H∞ Control[J].IEEE Trans.on Automatic Control,1998,43(1):125-132.
[21] Chen J,Gu G,Nett C N.Worst case identification of continuous time systems via interpolation[J].Automatica,1994,30 (12):1825-1837.
[22] 李异平.l1鲁棒辨识:最小二乘算法及试验设计[J].控制理论与应用,2003.20(4):492-502.
[23] Chen J.Frequency domain tests for validation of linear fractional uncertain modesl[J].IEEE Trans.on Automatic Control,1997,42(6):748-760.
[24] Parrilo P A,Sznaier M.Mixed time/frequency-domain based robust identification[J].Automatica,1998,34(11):1375-1389.
[25] Bitmead R,Zang Z.An iterative identification and control strategy[C]//Proc,of European Control Conference,Grenoble,1991:1395-1400.
[26] Hjalmarsson H,Gunnarsson S,Gevers M.Optimality and suboptimality of iterative identification and control design schemes[C]//Proc.of the American control conference,1995,4:2559-2563.
[27] Callafon D,Van Den Hof P.Suboptimal feedback control by a scheme of iterative identification and control design[J].Mathematical Modelling of Systems,1997,3(1):77-101.
[28] Anderson B D O,Bombois X,Gevers M.Caution in iterative modeling and control design[C]//Proc,of the IFAC Conference on Adaptive Systems in Control and Signal Processing,Glasgow,U.K.,1998:13-19.
[29] Holmberg U,Valentinotti S,Bonvin D.An identification for control procedure with robust performance[J].Control Engineering Practice,2000,8(10):1107-1117.
[30] Akcay H,Heuberger P.A frequency-domain iterative identification algorithm using general orthonormal basis functions[J].Automatica,2001,37(57:663-674.
[31] Date P,Lanzon A.A combined iterative scheme for identification and control redesigns[J].International Journal of Adaptive Control and Signal Processing,2004,18(8):629-644.
[32] Hildebrand R,Lecchini A,Solari G,et al.Prefiltering in iteratire feedback tuning:optimization of the prefilter for accuracy[J].IEEE Trans.on Automatic Control,2004,49(10):1801-1805.
[33] Bombois X,Gevers M,Scorletti G,et al.Robustness analysis tools for an uncertainty set obtained by prediction error identification[J].Automatica,2001,37:1629-1636.
[34] Zhou K,Doyle J C,Glover K.Robust and optimal control[M].Prentice-Hall,New Jersey,USA,1996.
[35] Gevers M,Bombois X,Codrons B.Model validation for control and controller validation in a prediction error identi cation framework-Part Ⅰ:theory[J].Automatica,2003,39 (3):403-427.
[36] Sippe D.From data to performance-system identification uncertainty and robust control design[D].Netherlands:Delft University of Technology,2006.
[37] Vinnicombe G.Frequency domain uncertainty and the graph topology[J].IEEE Trans.on Automatic Control.1993,38(9):1371-1383.
[38] Date P,Vinnicombe G.An algorithm for identification in the vgap metric[C]//Proc,of the 38th Conference on Decision ＆ control Phoenix,Arizona USA,1999:3280-3235.
[39] Date P,Vinnicombe G.Algorithm for worse case identification in H∞ and in the v-gap metric[J].Automatica,2004,40(6):994-1002.
[40] Hildebrand R,Gevers M.Identification for control:optimal input design with respect to a worst-case v-gap cost funetion[J].SIAM Journal Control and Optimization,2003,41(5):1586-1608.
[41] Leeehini A,Lanzon A,Anderson B D O.A model reference approaeh to safe controller changes in iterative identification and control[J].Automatics,2006,42(27:193-203.
[42] Bombois X,Gevers M,Scorletti G.A measure of robust stability for an identified set of parametrized transfer functions[J].IEEE Trans.on Automatic Control,2000,45 (117:2141-2145.
[43] Gevers M,Bombois X,Codrons B.Model validation for control and controller validation in a prediction error identification framework.Part Ⅱ:Illustrations[J].Automatics,2003,39 (3):417-427.
[44] Douma S G,Van den Hof P M J.Relations between uncertainty structures in identification for robust control[J].Automatica,2005,41(3):439-457.
[45] Gevers M,Bombois X,Seorletti G.Experiment design for robust control:why do more work than is needed[C]//Lecture Notes in Control and Information Sciences,2006.139-162.
[46] 张立群,邵惠鹤.系统辨识实验设计综述[J].化工自动化积仪表,2004,31(1):1-5.
[47] Forssell U,Ljung L.Some results on optimal experiment design[J].Automatica,2000,36(5):749-756.
[48] 张立群,邵惠鹤.基于内模控制的系统辨识实验信号设计[J].系统工程与电子技术,2004,26(107:1464-1465.(Zhang Liqun,Shao Huihe.Control-relevant identification experiment signal design[J].Systems Engineering and Electronics,2004,26(10):1464-1465.)
[49] Cooley B L,Lee J H.Control-relevant experiment design for muhivariable systems described by expansions in orthonormal bases[J].Automatics,2001,37(2):273-281.
[50] Lindqvist K,Hjalmarsson H.Identification for control:Adaptive input design using convex optimization[C]//Proc,of the 40th IEEE conference on Decision and Control,Orlando,Florida USA,2001:4326-4331.
[51] Jansson H,Hjalmarsson H.Mixed H∞ and H2 input design for identification[C]//Proc,of the 43th IEEE conference on Decision and Control,Atlantis,Paradise Island,Bahamas,2004,388-393.
[52] Martensson J,Jansson H,Hjalmarsson H.Input desing for identification of zeros[C]//the 16th IFAC World Congress,Prague,2005.
[53] Jausson H.Experiment design with applications in identification for control[D].Sweden:Royal Institute of Technology (KTH),2004.
[54] Jansson H,Hjalmarsson H.A general framework for mixed H∞ and H2 input design[C]//Mathematical Theories of Networks and Systems,Leuven,Belgium,2004.
[55] Bombois X,Scorletti G,Van den Hof P M J.Least costly identification experiment for control:a solution based on a high-order model approximation[C]//Proc,of the American control conference,2004:2818-2823.
[55] Bombois X,Scorletti G,Gevers M,et al.Least costly identification experiment for control[J].Automatica,2006,42(10):1651-1662.
[57] Jansson H,Hjalmarsson H.Input design via LMIs admitting frequency-wise model specifications in confidence regions[J].IEEE Trans.on Automatic Control,2005,50 (10):1534-1549.
[58] Gerencser L,Hjalmarsson H.Adaptive input design in system identification[C]//Proc,of the 44th IEEE Conference on Decision and Control,2005:4988-4993.
[59] Gerencser L,Martensson J,Hjalmarsson H.Adaptive input design for ARX systems[C]//European Control Conference,2007.
[60] 张立群,邵惠鹤.面向控制器设计的多变量系统辨识实验信号[J].控制与决策,2004,19(7):824-830.
[61] Zhu Y C.Muhivariable process identification for MPC:the asymptotic method and its applications[J].Journals of Process Control,1998,8(2):101-115.
[62] Hildebrand R,Solari G.Identification for control:Optimal input intended to identify a minimum variance controller[J].Automatica,2007,43(5):758-767.
[63] Murray R M,Astrom J K,Future directions in control in an information-rice world[J].IEEE Control System Magazine,2003,23(2):20-33. |
