Journal of Systems Engineering and Electronics ›› 2010, Vol. 32 ›› Issue (7): 1365-1368.doi: 10.3969/j.issn.1001506X.2010.07.003

• 电子技术 • 上一篇    下一篇

一种基于信道外推的预编码方法

朱磊1,2,3,4, 熊勇1,2,3, 杨秀梅1,2,3   

  1. (1. 中国科学院上海微系统与信息技术研究所, 上海 200050; 2. 上海无线通信研究中心, 上海 200335; 3. 中国科学院无线传感网与通信重点实验室, 上海 200335; 4. 中国科学院研究生院, 北京 100049)
  • 出版日期:2010-07-20 发布日期:2010-01-03

Precoding method based on channel extrapolation

ZHU Lei1,2,3,4, XIONG Yong1,2,3, YANG Xiumei1,2,3   

  1. 1. Shanghai Inst. of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China; 2. Shanghai Research Center of Wireless Communication, Shanghai 200335, China;
    3. Key Laboratory of Wireless Sensor Networking and Communications, Chinese Academy of Sciences, Shanghai 200335, China;
    4. Graduate Univ. of Chinese Academy of Sciences, Beijing 100049, China)
  • Online:2010-07-20 Published:2010-01-03

摘要:

为了解决多天线(multiple input multiple output, MIMO)系统中因反馈延时带来的预编码码字和信道之间不匹配问题,提出了一种基于信道预测的预编码方法。该方法通过当前时刻和之前两个时刻的信道,利用外推方法,预测未来时刻的信道,使用预测信道,选择预编码码字并反馈到发送端,以补偿反馈延时的影响。仿真结果表明,该方法有效地减小了反馈延时带来的性能损失。

Abstract:

To solve the mismatch between precoding matrix and the channel, which is caused by the feedback delay, a precoding method based on channel prediction is proposed. In this method, by exploiting the channel information of the current and the last two successive slots, the channel matrix of the future can be extrapolated. According to the forecasting channel information, a precoding matrix is selected and sent to the transmitter to counteract the influence of feedback delay. The simulation results show that the proposed method can significantly mitigate the performance degradation due to the feedback delay.