系统工程与电子技术
• 可靠性 • 上一篇 下一篇
蔡忠义, 陈云翔, 项华春, 董骁雄
出版日期:
发布日期:
CAI Zhong-yi, CHEN Yun-xiang, XIANG Hua-chun, DONG Xiao-xiong
Online:
Published:
摘要:
针对无失效数据情况下产品的可靠性评估问题,提出加权最小二乘法结合期望Bayes(expectedBayesian, E-Bayes)可靠性评估方法与模型。根据工程经验,构造出产品失效概率的先验分布;运用Bayes理论与方法,给出产品失效概率的EBayes估计;在威布尔分布场合下,采用加权最小二乘法来拟合产品寿命分布参数,给出产品可靠性指标的点估计和区间估计;结合算例分析,探讨模型的稳健性与方法的优越性,表明该方法具有较好的工程应用价值。
Abstract:
Aiming at the problem of product reliability evaluation in condition of zero-failure data, a method combining the weight-least-square method with expectedBayesian (E-Bayes) reliability evaluation is put forward. According to the engineering experience, the prior distribution of product failure probability is constructed. Then the E-Bayes estimation of product failure probability is given by using the theory and method of Bayesian. In condition of Weibull distribution, the weight-east-square method is used to seek out the parameter of Weibull distribution, and obtain the reliability indexes’ point and interval estimation. At last the robustness of the model and the superiority of the method are discussed by an example which shows the value of the method in engineering application.
蔡忠义, 陈云翔, 项华春, 董骁雄. 基于无失效数据的加权E-Bayes可靠性评估方法[J]. 系统工程与电子技术, doi: 10.3969/j.issn.1001-506X.2015.01.35.
CAI Zhong-yi, CHEN Yun-xiang, XIANG Hua-chun, DONG Xiao-xiong. Method for evaluation of weight expected-Bayesian reliability based on zero-failure data[J]. Systems Engineering and Electronics, doi: 10.3969/j.issn.1001-506X.2015.01.35.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: https://www.sys-ele.com/CN/10.3969/j.issn.1001-506X.2015.01.35
https://www.sys-ele.com/CN/Y2015/V37/I1/219