基于关键质量特性的高效环境应力筛选方法

doi:10.12305/j.issn.1001-506X.2023.11.40

Abstract

Abstract:

According to the test conditions and procedures specified in the environmental test standards, the early failure products are eliminated through the environmental stress screening, so that the products can pass the early failure period as soon as possible. Under the current high reliability manufacturing background, the number of failed products found in the screening process is small and the efficiency cost ratio is low, a design process of environmental stress screening scheme is proposed. The basic principle of screening is clarified based on the stress-strength interference model, and the influence of screening stress and intensity dispersion on screening effect is analyzed. Secondly, considering the identification and measurement of key quality characteristic and dispersion analysis, the design process of screening scheme is formulated. Finally, the effectiveness of the proposed screening method is verified by using a certain radome as an example. The proposed method provides ideas for improving screening efficiency and reducing screening costs.

Key words: screening, key quality characteristic, failure rate, stress-strength interference model, dispersion

CLC Number:

TB114.3

Anqi ZHANG, Shengpeng ZHANG, Hongmin LI, Yao ZHU, Sikun MI. Efficient environmental stress screening method based on key quality characteristic[J]. Systems Engineering and Electronics, 2023, 45(11): 3706-3713.

Figures/Tables 13

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

References 32

1	CHA J H , FINKELSTEIN M . Environmental stress screening modelling, analysis and optimization[J]. Reliability Engineering and System Safety, 2015, 139, 149- 155. doi: 10.1016/j.ress.2015.03.003
2	陶俊勇, 陈循, 任志乾. 可靠性强化试验及其在某通信产品中的应用研究[J]. 系统工程与电子技术, 2003, 25 (4): 509- 512. doi: 10.3321/j.issn:1001-506X.2003.04.032
	TAO J Y , CHEN X , REN Z Q . Reliability enhancement testing and its application in a communication product[J]. Systems Engineering and Electronics, 2003, 25 (4): 509- 512. doi: 10.3321/j.issn:1001-506X.2003.04.032
3	YOU M Y . An integrated optimization framework for multi-cycle environmental stress screening tests and preventive maintenance scheduling[J]. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2017, 231 (5): 1037- 1044. doi: 10.1177/0954408916671972
4	ZHANG X Y, QI X L, CUI L, et al. Research on the influence of battlefield environment stress on radio fuze[C]//Proc. of the 6th International Conference on Electromechanical Control Technology and Transportation, 2021: 12081.
5	谢里阳, 张明川. 动态应力-强度干涉分析与失效率函数模型[C]//2007年全国机械可靠性学术交流会论文集, 2007: 5-9.
	XIE L Y, ZHANG M C. Dynamic stress strength interference analysis and failure rate function model[C]//Proc. of the National Mechanical Reliability Academic Conference, 2007: 5-9.
6	ZHANG J C , MA X B , ZHAO Y . A stress-strength time-varying correlation interference model for structural reliability ana-lysis using copulas[J]. IEEE Trans.on Reliability, 2017, 66 (2): 351- 365. doi: 10.1109/TR.2017.2694459
7	CHEN S, YUAN C Q, YAN X P. Reliability model based on stress-strength interference for marine propulsion shafting[C]//Proc. of the 3rd International Conference on Transportation Information and Safety, 2015: 481-484.
8	ZHU T F . Reliability estimation of s-out-of-k system in a multicomponent stress-strength dependent model based on copula function[J]. Journal of Computational and Applied Mathema-tics, 2022, 404, 113920. doi: 10.1016/j.cam.2021.113920
9	JIN C X , WANG Z C , ZHANG G B . Prioritization of key quality characteristics with the three-dimensional HoQ model-based interval-valued spherical fuzzy-ORESTE method[J]. Engineering Applications of Artificial Intelligence, 2021, 104, 104271. doi: 10.1016/j.engappai.2021.104271
10	LI A D , HE Z , WANG Q , et al. Key quality characteristics selection for imbalanced production data using a two-phase bi-objective feature selection method[J]. European Journal of Ope-rational Research, 2019, 274 (3): 978- 989. doi: 10.1016/j.ejor.2018.10.051
11	GAO Z H , XU F Q , ZHOU C L , et al. Critical procedure identification method considering the key quality characteristics of the pro-duct manufacturing process[J]. Process, 2022, 10 (7): 1343. doi: 10.3390/pr10071343
12	YE K W , WANG H , MA X B . A generalized dynamic stress-strength interference model under δ-failure criterion for self-healing protective structure[J]. Reliability Engineering and System Safety, 2023, 229, 108838. doi: 10.1016/j.ress.2022.108838
13	LIU Y M , CHEN Y . Dynamic reliability evaluation of high-speed train gearbox based on copula function[J]. IEEE Access, 2022, 10, 51792- 51803. doi: 10.1109/ACCESS.2022.3174043
14	MENDEZ-GONZALEZ L C , RODRIGUEZ-PICON L A , OLGUIN I J C P . The additive perks distribution and its applications in reliability analysis[J]. Quality Technology and Quantitative Management, doi: 10.1080/16843703.2022.2148884
15	ABBA B , WANG H . A new failure times model for one and two failure modes system: a Bayesian study with Hamiltonian Monte Carlo simulation[J]. Proc.of the Institution of Mechanical Engineers Part O-Journal of Risk and Reliability, 2023, doi: 10.1177/1748006X221146367
16	XIE M , TANG Y , GOH T N . A modified Weibull extension with bathtub-shaped failure rate function[J]. Reliability Engineering and System Safety, 2002, 76 (3): 279- 285. doi: 10.1016/S0951-8320(02)00022-4
17	王正, 谢里阳, 李兵. 机械零件动态可靠性模型及失效率研究[J]. 东北大学学报(自然科学版), 2007, 28 (11): 1620- 1623.
	WANG Z , XIE L Y , LI B . Time-dependent reliability model and failure rate study of mechanical components[J]. Journal of Northeastern University (Natural Science), 2007, 28 (11): 1620- 1623.
18	ZHANG X Q , GAO H Y , HUANG H Z , et al. Dynamic reliability modeling for system analysis under complex load[J]. Reliability Engineering and System Safety, 2018, 180, 345- 351. doi: 10.1016/j.ress.2018.07.025
19	AN Z W, HUANG H Z, WANG Z L. A time-dependent stress-strength interference model with strength degradation following a gamma process[C]//Proc. of the 14th ISSAT International Conference on Reliability and Quality on Design, 2008: 270-273.
20	张士峰, 王惠频. 应力筛选试验的可靠性分析[J]. 火炮发射与控制学报, 2000, (1): 49- 54. doi: 10.3969/j.issn.1673-6524.2000.01.012
	ZHANG S F , WANG H P . Reliability analysis of stress screening test[J]. Journal of Gun Launch & Control, 2000, (1): 49- 54. doi: 10.3969/j.issn.1673-6524.2000.01.012
21	张海娟, 张晓冉. 用Fisher信息阵处理截断正态分布的参数估计[J]. 重庆工商大学学报(自然科学版), 2007, 24 (3): 228-229, 263. doi: 10.3969/j.issn.1672-058X.2007.03.006
	ZHANG H J , ZHANG X R . Using Fisher information matrix to deal with parameter estimation for truncated samples from normal distribution[J]. Journal of Chongqing Technology and Business University (Natural Science Edition), 2007, 24 (3): 228-229, 263. doi: 10.3969/j.issn.1672-058X.2007.03.006
22	WANG H Q , LIANG L J , NIU Z W , et al. Identification of KQCS for complex products based on mutual information and improved gravitational search algorithm[J]. Mathematical Problems in Engineering, 2015, 765985.
23	HAN X , LI R , WANG J , et al. Identification of key design characteristics for complex product adaptive design[J]. International Journal of Advanced Manufacturing Technology, 2018, 95 (1/4): 1215- 1231.
24	ZAIM S , SEVKLI M , CAMGOZ-AKDAG H , et al. Use of ANP weighted crisp and fuzzy QFD for product development[J]. Expert Systems with Applications, 2014, 41 (9): 4464- 4474. doi: 10.1016/j.eswa.2014.01.008
25	JEONG H J , KANG C W , KIM B H . Requirements development process for manufacturing information systems based on quality function deployment[J]. International Journal of Computer Integrated Manufacturing, 2018, 31 (2): 164- 174. doi: 10.1080/0951192X.2017.1407448
26	MAJESKE K D . Approving vision-based measurement systems in the presence of within-part variation[J]. Quality Engineering, 2012, 24 (1): 49- 59. doi: 10.1080/08982112.2011.628624
27	WU H Z , PAN X T , CAI J W , et al. Method of measurement system analysis techniques in the manufacturing quality analysis[J]. Mechanical Materials and Manufacturing Engineering Ⅲ, 2014, 455, 527- 532.
28	KUMAR M B , PARAMESHWARAN R . Fuzzy integrated QFD, FMEA framework for the selection of lean tools in a manufacturing organization[J]. Production Planning & Control, 2018, 29 (5): 403- 417.
29	WU S M , YOU X Y , LIU H C , et al. Improving quality function deployment analysis with the cloud multimoora method[J]. International Transactions in Operational Research, 2020, 27 (3): 1600- 1621. doi: 10.1111/itor.12484
30	CHENG Y B , WANG Z Y , CHEN X H , et al. Evaluation and optimization of task-oriented measurement uncertainty for coordinate measuring machines based on geometrical product specifications[J]. Applied Sciences-Basel, 2019, 9 (1): 6.
31	ALTINISIK A , BOLOVA E . A comparison of off-line laser scanning measurement capability with coordinate measuring machines[J]. Measurement, 2021, 168, 108228. doi: 10.1016/j.measurement.2020.108228
32	MARKULIK S , PETRIK J , SOLC M , et al. The relationship between process capability and quality of measurement system[J]. Applied Sciences-Basel, 2022, 12 (12): 5825. doi: 10.3390/app12125825

[1]	HAN Ping, JIA Kun, LU Xiaoguang, HAN Binbin. Improved non-local mean filtering method for PolSAR images [J]. Systems Engineering and Electronics, 2019, 41(5): 992-999.
[2]	WANG Xinpeng, ZHANG Jingyuan, ZHANG Honggang. Reliability analysis for equipment in storage with zero-failure data [J]. Systems Engineering and Electronics, 2019, 41(5): 1169-1172.
[3]	CAI Fuqing, WANG Ge, WANG Yue. Study on service reliability for aircraft based on daily maintenance and flight data [J]. Systems Engineering and Electronics, 2018, 40(10): 2388-2392.
[4]	JING Xiaorong, MO Linlin. Limited feedback interference alignment algorithm based on linear dispersion space-time code [J]. Systems Engineering and Electronics, 2017, 39(7): 1604-1612.
[5]	ZHAI Yali, ZHANG Zhihua, SHAO Songshi. Failure rule analysis of degradation products and its application [J]. Systems Engineering and Electronics, 2017, 39(6): 1420-1424.
[6]	LU Fa-xing, JIA Zheng-rong, WU Ling. Research on the method of zone fire considering search ability of terminal guidance ammunition [J]. Systems Engineering and Electronics, 2016, 38(11): 2604-2609.
[7]	CAI Zhong-yi, CHEN Yun-xiang, ZHANG Zheng-min, XIANG Hua-chun. Method on reliability assessment based on proportional failure rate degradation model [J]. Systems Engineering and Electronics, 2015, 37(8): 1943-1947.
[8]	WANG Zhao, GU Hong, SU Wei-min, FAN Jin-yu, CHEN Jin-li. Detection of high speed targets in noise radar with#br# wideband Gaussian spectrum [J]. Systems Engineering and Electronics, 2015, 37(6): 1266-1272.
[9]	HAO Shuai, CHENG Yong-mei, MA Xu, ZHAO Jian-tao, LIU Hu-cheng. Multi-feature fusion robust particle filter tracking based on fuzzy measure [J]. Systems Engineering and Electronics, 2015, 37(11): 2447-2453.
[10]	FENG Li-yuan, YAO Xu-liang, CAO Ran, ZOU Ai-li. Reliability and safety analysis of repairable control method based on distributed systems [J]. Systems Engineering and Electronics, 2015, 37(11): 2663-2668.
[11]	YUAN Gannan, JIA Ruicai, ZHANG Hongwei. Improved algorithm on retrieval ocean surface current based on X-band radar [J]. Journal of Systems Engineering and Electronics, 2012, 34(2): 276-281.
[12]	GAO Ming, GE Jian-hua, GAO Yang. Research on amplify-and-forward cooperation based on liner dispersion codes [J]. Journal of Systems Engineering and Electronics, 2009, 31(5): 1026-1029.
[13]	HUANG Zhi-xiang, SHA Wei, WU Xian-liang, CHEN Ming-sheng, KUANG Xiao-jing. Scheme of symplectic FDTD [J]. Journal of Systems Engineering and Electronics, 2009, 31(2): 456-458.

Efficient environmental stress screening method based on key quality characteristic

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 13

References 32

Related Articles 13

Recommended Articles

Metrics

Comments